Instructions for the installer
26
8.5.2
Adjusting the minimum setting for LPG
To adjust the minimum setting with LPG, you must tighten the screw inside or
next to the tap rod (depending on the model) fully in a clockwise direction.
The bypass diameters for each individual burner are shown in table “8.2
Adjustment for ULPG”.
After adjustment with a gas other than the preset one, replace the label on the
casing of the appliance with the label corresponding to the new gas. The label is
inserted inside the pack together with the nozzles.
8.6
Arrangement of the burners on the cooking hob
BURNERS
1. Auxiliary
2. Semi-rapid
3. Reduced Rapid
4. Ultra-rapid
5. Wok double control
8.7
Lubrication of gas taps
Over time the gas taps may become difficult to turn and get blocked. Clean them
internally and replace the lubrication grease.
This procedure must be carried out by a specialised technician
.
914774677/ B
