background image

Instructions for the user

51

PROBLEM

POSSIBLE CAUSE

PROBABLE SOLUTION

The temperature inside the freezer
does not freeze the foods properly

-  internal temperature control set

too low;

- frequent or prolonged door

opening;

- the door does not close

hermetically;

-  excessive sugar content in the

food for freezing.

-  Set the selector to a higher

setting. 

-  open the door less frequently and

for as little time as possible;

-  check that the food packages are

arranged properly in the drawers,

the seal is closing properly and is

not damaged, and the fridge

freezer is properly level on the

floor;

- some foods may not freeze

completely unless they are at very

low temperatures (ice cream, juice

concentrates)

Excessive ice formation:

-  Temperature control set too high

(leading to a lower temperature in

the freezer);

- frequent or prolonged door

opening;

-  Set the control to a lower setting

so that the temperature inside the

freezer increases slightly;

- check that the seals are

functioning properly;

-  open the door less frequently and

for less time;

increase the atmospheric

temperature and humidity;

-  do not put hot food or drinks in the

freezer;

The front of the appliance is warm to

the touch

-  the fridge freezer is functioning

correctly.  There is a surface

heating system inside the cabinet

to limit the formation of

condensation around the door

seal.

Summary of Contents for F32BCG


























Reviews: