User instructions
35
ADJUSTING THE UPPER BASKET
The height of the top basket can be adjusted to allow large dishes or pans
to be placed in the bottom basket.
The adjustment procedure may be type
A
or
B
, depending on the
dishwasher model purchased.
Version A: pull-out
with adjustment in
two positions.
Pull out both the basket guides.
Remove the stops, first releasing them as shown in the diagram.
Pull out the basket.
Fit the upper or lower pair of wheels into the guide, depending on the
setting required
;
Return the stops to their original position
.
The left hand and right hand sides of the basket
must always be set
at
the same height
.
Version B:
with adjustment in
three positions
on both sides.
The sides of the basket
must always be set
at the same height
.
Raise the basket by pulling on the top edge
(1)
, to the first or second
catch depending on the height required.
To lower the basket, first release it by pulling the release lever
(2)
.
Adjustment is also possible with the basket loaded, but in this case when
lowering the basket it should be held steady with one hand to avoid
knocking the dishes.
