User instructions
17
CANCELLING THE CURRENT PROGRAM
To cancel the currently selected program open the door and hold
down the
PROGRAM SELECTION (3)
button for a few seconds until
the
indicator lights
for programs
4
and
5
illuminate simultaneously
(marked "end").
Close the door.
After approximately 1 minute the dishwasher will advance to the end
of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a
new program. When the door is closed the dishwasher will automatically
select the new program.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
Always use the dishwasher
with a full load
.
Do not wash the dishes in running water.
Use the washing program that is
most appropriate
for each type of
load.
Do not carry out any preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to 60°C.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to save
on electricity, observe the following:
separate
the more delicate items from dishes that are more resistant
to aggressive detergents and high temperatures;
do not
pour the detergent directly on the dishes.
If the door has to be opened while washing is in progress, the program will
be interrupted. The relative light will keep flashing and a beeper will signal
that the cycle has not been completed. You must wait about
1 minute
before closing the door to restart the program. When the door is closed
the program will continue from where it was interrupted. This operation
should
only be carried out if strictly necessary
, because it might cause
problems in execution of the program.
