User instructions
14
3.2
Washing programs
Before starting a washing program make sure that:
The water supply tap is
open
.
The softener
container
contains
regenerating salt
.
The
correct amount of detergent
has been added to the
dispenser
.
The baskets have been
correctly loaded
.
The spray arms are able to
rotate freely
and without
obstruction.
The dishwasher door is securely closed.
Warning
:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
It is not possible
to select any options when the
soak program
is being used.
All options
except "Flexi Tabs"
are
disabled
at the end of the
wash cycle. To
disable the “Flexi Tabs” option, press
the
relative button (the light goes out).
All options, including
"Flexi Tabs"
are
disabled when a program
is
CANCELLED
after it has begun.
ADDITIONAL OPTIONS
Some models feature additional options, activated by
pressing two
buttons simultaneously
. In this case, two lines in the control panel
graphics link the symbol of the additional option to the two buttons to be
pressed simultaneously to enable it. (e.g.
“Flexi Tabs”
in this illustration)
