Smeg CWC500R User Manual Download Page 2

Page: 2 / 15

Safety and usage instructions

Technical

characteristics

Installation and positioning

INSTALLER – TECHNICAL ASSISTANT INSTRUCTIONS

First

startup

Settings

Screen-displayed anomalies

(technical)

USER

INSTRUCTIONS

Program

selection

Maintenance and cleaning

Problems and anomalies (user)

Screen-displayed anomalies (user)

Thank you for having chosen this product.

We recommend that you read all of the instructions contained in the manual attentively in order to become

familiar with the most suitable conditions for the correct use of the dishwasher.

TECHNICAL INSTRUCTIONS:

Are intended for qualified personnel who will perform the installation, the setup, the testing
and eventual assistance operations.

USER INSTRUCTIONS:

Indicate the recommended usage, the command descriptions and the proper cleaning and
maintenance operations for the dishwasher.

Summary of Contents for CWC500R
















Search results

Summary of Contents for CWC500R

Reviews:

Related manuals for CWC500R

Brands by name

Popular brands

Smeg CWC500R, User Manual

Search results

Summary of Contents for CWC500R

Reviews:

Related manuals for CWC500R

Brands by name

Popular brands