14
8.2 Before
washing
Use only detergents and rinse aids for industrial dishwashers.
Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
Check:
Turn on the
mains water
tap (user)
The level of
detergent and
rinse aid in the
containers.
That there is
regenerating salt
in the relative
container (if
fitted).
That the filters are in place,
the spray arms rotate, and
there are no foreign bodies in
the dishwasher.
Switch on the master
switch (user): the
word “OFF” appears
on the display.
8.3 FIRST USE EACH DAY (tank and boiler empty)
Indicator lights as follows: off; green; orange;
flashing.
Display shows
Actions and what happens
With the door closed:
Press and hold it down
the dishwasher fills the tank after the water in the boiler
has heated up; light
L2
shows orange and the boiler
heating element symbol appears on the display.
Wait for
P1
to appear and LED
L1
to change from
orange to green;
the tank heating element comes on until the set
temperature is reached. The duration of this stage may
vary depending on the mains water temperature and on
the single-phase connection.
Press the button to display the tank (left) and boiler
(right) temperatures.
Load the dishes
Select the program required by pressing
.
Confirm the program start by pressing and holding it
down for 1 second (light
L2
changes from green to
orange).
When topping up the tanks, take care not to swap the products; this might damage the dishwasher and
cause malfunctions.
Do not mix different detergents; this would damage the dispenser device.
Industrial dishwasher detergents may cause serious irritations. Comply carefully with the instructions provided by
the detergent producer on the pack.
Summary of Contents for CW501D
Page 1: ...PROFESSIONAL DISHWASHER ...
Page 2: ...2 ...
