15
Cycle in progress, the time left until the end of the cycle
is displayed. If the door is opened “CLOSE” flashes and
the program stops; when it is closed again the program
restarts from the beginning.
At the end of the program “
End
” flashes
Unload the dishes
When the door is closed again, the last program is repeated.
8.4 Program change
With the door closed, to change to a fresh program
instead of repeating the last one, press the button.
The programs available are displayed (light
L2
changes
from orange to green).
If a program has already started, hold down to
interrupt it.
change the program by pressing
.
Confirm the program start by pressing and holding it
down for 1 second (light
L2
changes back to orange).
N.B.:
During heating of the water in the boiler, the tank heating element
and boiler heating element
symbols
may appear on the display.
Filter presence sensor (on some models only)
The filter is fitted with a sensor which checks that it is properly fitted; if it is not in the correct position, the word
“FiLter”
appears on the display.
9 CHOOSING
THE
PROGRAM
PROGRAM
TYPE OF DIRT
DURATION (*)
P1
Glasses
Short, about 1’ 30”
1’ with
glassware
function active.
P2
Glasses, cups and plates with light dirt
Average, about 2’ 30”
2’ with
glassware
function active.
P3
Very dirty dishes and cutlery
Long, about 4’
5’30” with
sani
function active.
P4
Depending on the duration set.
As required from 5 to 20'.
(*)
The cycle duration stated above refers to three-phase appliances supplied with hot water at 50°C.
If the appliance is supplied with cold water, the cycle duration might increase depending on the intake
water temperature, since the dishwasher is fitted with the HTR system, which requires set temperature and
pressure for rinsing.
Summary of Contents for CW501D
Page 1: ...PROFESSIONAL DISHWASHER ...
Page 2: ...2 ...
