14
ADJUSTING THE COFFEE MILL
The coffee mill is preset in the factory to make coffee correctly
and should not require adjusting initially.
However, if after making the first few coffees you find that de-
livery is either too fast or too slow (a drop at a time), this can be
corrected by adjusting the grinding adjustment knob (fig. 12).
Turn one click clockwise (one number) for more rapid coffee de-
livery (not a drop at a time).
Turn one click anticlockwise for slower coffee delivery and a
creamier coffee. These adjustments will only be evident after at
least 2 cups of coffee have been delivered.
The grinding adjustment knob must only be turned when the
coffee mill is in operation.
For slower delivery and creamier coffee, turn one click anticlock-
wise (finer pre-ground coffee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coffee).
(Coffee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee in
the mill. It is, however, guaranteed to be new.)
MAKING ESPRESSO COFFEE WITH PRE-GROUND
COFFEE (INSTEAD OF BEANS)
• Press the
button (C3) (fig. 16) to select the pre-
ground coffee function. This disables the coffee mill func-
tion.
The appliance now displays the message: “READY PRE-
GROUND”.
• Extract the machine by pulling it outwards using the han-
dles.
• Lift the central lid, place one measure of pre-ground coffee
in the funnel (fig. 17), push the appliance in then proceed
as described in the section “Making coffee using coffee
beans”.
N.B.: You can make just one coffee at a time by pressing the
(C8),
(C9) or
(C10) button once only.
•
After using the machine with pre-ground coffee, to go back
to making coffee using beans, deactivate the pre-ground
coffee function by pressing the
button (C7) again to
enable the coffee mill.
NOTE 1: Never introduce pre-ground coffee when the machine is
off or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 level measure, otherwise either
the appliance will not make the coffee and the pre-ground
coffee will be dispersed inside the appliance, dirtying it, or the
coffee will be delivered a drop at a time.
NOTE 3: Use the measure provided to add the right amount of
coffee.
NOTE 4: Introduce only pre-ground coffee for espresso coffee
machines into the funnel. Never fill with coffee beans, freeze
dried coffee or other substance that could damage the appli-
ance.
NOTE 5: If more than one measure of pre-ground coffee is used
and the funnel clogs, push the coffee down with a knife (fig. 18)
then remove and clean the infuser and machine as described in
the “Cleaning the infuser” section.
DELIVERING HOT WATER
• Always make sure the appliance is ready.
• Make sure the hot water spout is in place (fig. 4);
• Position a container under the spout (fig. 3).
• Press the
button (C5) (fig. 1).
The message “HOT WATER” is displayed and hot water flows
out of the hot water spout into the container.
(You should not deliver hot water for more than 2 minutes
at a time).
To interrupt the flow, press the
button (C5).
Once the set quantity of hot water has been reached, deliv-
ery stops automatically.
CHANGING THE QUANTITY OF HOT WATER
The appliance is set by default to automatically deliver about
200 ml / 6.76 oz of hot water.
To change these quantities, proceed as follows:
• Attach the hot water spout (fig. 4).
• Position a container under the spout (fig. 3).
• Hold the
button (C5) down for at least 2 seconds then
release it. The message “HOT WATER PROGRAM QUANTITY”
is displayed and hot water flows out of the hot water spout.
• When the hot water in the cup reaches the required level,
press the
button (C5) to memorise the new amount.
(You should not deliver hot water for more than 2 minutes
at a time).
MAKING CAPPUCCINO (FROTHED MILK AND COF-
FEE)
• Select the taste of the coffee you want to use to make the
cappuccino by pressing the
button (C7).
