18
• DESCALE NO
• TEMPERATURE MEDIUM
• OFF AFTER 1 HOUR
• WATER HARDNESS 4
•
DEFAULT VALUES NO
Setting the clock
To set the clock, proceed as follows:
• Press the MENU button (C2) (the light over the button
comes on) then press the NEXT button (C3) repeatedly until
the appliance displays: “CLOCK… 00:00”.
• Press the CHANGE button (C4) to set the clock.
(If you hold the CHANGE button (C4) down, the time is
changed rapidly).
• Press the OK button (C5) to confirm.
• Press the MENU button (C2) to exit programming mode or
NEXT (C3) to change other parameters.
Setting auto-start time
This function programmes the time the machine will come on
automatically to be ready for use.
• Make sure the clock on the appliance is set as described in
the previous section.
• Press the MENU button (C2) (the light over the button
comes on) then press the NEXT button (C3) repeatedly until
the appliance displays: “START TIME… 00:00”.
• Press the CHANGE button (C4) to set the auto-start time.
(If you hold the CHANGE button (C4) down, the time is
changed rapidly).
• Press the OK button to confirm the value;
• Press the NEXT button (C3) once and the appliance displays
the message: “AUTO-START NO”.
Press the CHANGE button (C4) to modify the function (the
machine displays “AUTO-START YES”).
• Press the OK button (C5) to activate auto-start;
NOTE: when the machine is off and an auto-start time has been
set, the
symbol appears alongside the time on the unlit
display.
• Press the MENU button (C2) to exit programming mode or
NEXT (C3) to change other parameters.
Descaling
Important!
Before descaling, make sure the water
softener filter has been removed.
Important!
Descaler contains acids which may irri-
tate the skin and eyes. It is vital to respect the manufacturer’s
safety warnings given on the descaler pack and the warnings
relating to the procedure to follow in the event of contact with
the skin and eyes.
N:B::
Use the descaler recommended by the manufac-
turer only. Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
Over time, constant heating up of the water used to make the
coffee leads to limescale building up in the inner circuits of the
appliance.
When “DESCALE” is displayed, the machine requires descaling.
Proceed as follows:
• press the MENU button (C2) (the light over the button
comes on) then press the NEXT (C3) button repeatedly until
the appliance displays “DESCALE NO”;
• press the CHANGE button (C4) and the appliance displays
“DESCALE YES”
• press the OK button (C5) to start the descale programme;
• empty the water tank, pour the contents of the descaler
bottle into the tank respecting the instructions given on
the descaler pack, then add water.
When descaling subsequently, use descaler of the same
type and brand as supplied (available from the manufac-
turer’s authorised Customer Services) or a descaler recom-
mended by Customer Services. Always follow the instruc-
tions on the pack.
• attach the hot water spout to the nozzle;
• place a container with a minimum capacity of 2 litres /
67.63 oz under the hot water spout (fig. 3);
• press the OK button (C5). Descaler flows out of the hot wa-
ter spout into the container below.
“APPLIANCE IN DESCALE” is displayed;
• the descale programme automatically performs a series of
deliveries and pauses to remove limescale deposits from
inside the machine.
• After about 30 minutes, the appliance displays “RINSING
FILL TANK”.
The appliance must now be rinsed through to eliminate residues
of descaling solution from inside the appliance. Proceed as fol-
lows:
• Empty the water tank, rinse and fill with clean water.
• Replace the tank;
• Empty the full container and put back under the hot water
spout;
• Press the OK button (C5). Hot water flows out of the spout
into the container below and the appliance displays “RINS-
ING”;
• When the water tank is empty, the appliance displays the
message “RINSING COMPLETE... PRESS OK”;
