4
5
EN
A4. Waste coffee container
A5. Brewing unit
A6. Cup tray lights
A7. On/OFF/stand-by button
A8. Control panel
A9. Tray
A10. Hot water and steam nozzle
A11. IEC connector
A12. Water tank
A13. Coffee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment knob
A18. Pre-ground coffee funnel door
A19. Measure
A20. Compartment for measure
A21. Pre-ground coffee funnel
A22. Power cable
A23. Main switch
Description of the control panel
(page 3 - B)
N.B.!
A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2. MENU icon to activate or deactivate menu parameter set-
ting mode
B3. icon to turn lights A6 on and off
B4. icon to select the coffee taste
B5.
icon to select the type of coffee (espresso, small cup,
medium cup, large cup, mug)
B6.
icon to exit the selected mode
B7-B8.
icons to scroll forwards or backwards through the
menu and display the various modes
B9. OK icon to confirm the selected function
B10.
icon to deliver a cup of coffee
B11.
icon to deliver two cups of coffee
B12.
icon to deliver cappuccino
B13.
icon to deliver hot water
Description of milk container and accesso-
ries
(page 3 - C)
C1. Frothed milk regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Important!
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of in-
stallation (see Built-in installation).
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
• Do not install the appliance in rooms where the tempera-
ture may drop to 0°C or lower.
• Customise the water hardness as soon as possible following
the instructions in the “Setting water hardness” section.
Connecting the appliance
Danger!
Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance. Connect the appliance to an efficiently
earthed and correctly installed socket with a minimum current
rating of 10A only. If the power socket does not match the plug
on the appliance, have the socket replaced with a suitable type
by a qualified professional. To comply with safety directives, an
omnipolar switch with a minimum contact distance of 3 mm
must be installed. Do not use multiple sockets or extensions.
Important!
Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
