12
13
EN
Changing coffee temperature
To change coffee temperature, proceed as follows:
• Press the MENU icon (B2) to enter the menu and then the
icons (B7) and (B8) until “TEMPERATURE” is dis-
played.
• Press the OK icon (B9).
• Press the
icons (B7) and (B8) to select the required
coffee temperature from low, medium and high.
• Press the OK button (B9) to confirm the temperature select-
ed.
• Press the icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• remove the “Total Hardness Test” strip (attached to page 2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• Press the MENU icon (B2) to enter the menu and then the
icons (B7) and (B8) until “WATER HARDNESS” is dis-
played.
• Press the OK icon (B9).
• Press the
icons (B7) and (B8) until the number co-
incides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message “WATER HARDNESS 3”
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to provide the des-
cale warning when actually necessary.
Programming coffee
For instructions on programming coffee, see the “CHANGING THE
QUANTITY OF COFFEE IN THE CUP” section.
Programming cappuccino
For instructions on programming cappuccino, see the section
“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO”.
Programming the jug
This function is not supported by this model.
Programming water
For instructions, see the “CHANGING THE QUANTITY OF HOT WA-
TER” section.
Descaling
Important!
Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.:
Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When “PLEASE DESCALE !” is displayed, the machine requires
descaling.
Proceed as follows:
• make sure the machine is ready;
• Press the MENU icon (B2) to enter the menu and then the
icons (B7) and (B8) until “DESCALE” is displayed.
• Press the OK icon (B9).
The message “ADD DESCALER PLEASE CONFIRM” is dis-
played.
• Empty the tank of water, pour the contents of the descaler
bottle into the tank respecting the instructions given on the
descaler pack, then add water.
Position a container with a capacity of about 2 litres under
the hot water spout.
• Press the OK icon (B9). Descaler flows out of the hot water
spout into the container below.
The appliance displays: “DESCALING”.
• The descale programme automatically performs a series of
deliveries and pauses.
• After about 30 minutes “DESCALE COMPLETE PLEASE CON-
FIRM” is displayed.
• Press the OK icon (B9). “RINSING FILL TANK” is displayed.
• Empty the water tank, rinse to eliminate descaler residues,
then fill with clean water.
• Replace the tank full of clean water.
“RINSING PLEASE CONFIRM” is displayed again.
• Press the OK icon (B9) again.
Hot water flows out of the spout into the container below
and “RINSING” is displayed.
• Wait until “RINSING COMPLETE PLEASE CONFIRM” is dis-
played.
• Press the OK icon (B9).
