16
EN
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK!
The water tank is empty or positioned
incorrectly.
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go.
GROUND TOO FINE ADJUST MILL AND
alternating with PRESS OK
The grinding is too fine and the coffee
is delivered too slowly.
Turn the grinding adjustment knob one click
clockwise towards “7”.
GROUND TOO FINE ADJUST MILL AND
(alternating with)
PRESS OK
(then)
FILL TANK
The tank has been removed during
delivery.
Insert the tank and press the OK icon (B9).
“HOT WATER PRESS OK” is displayed.
Press the OK icon (B9) again.
The appliance is once again ready for use.
EMPTY WASTE COFFEE CONTAINER
The waste coffee container (A4) is too
full or more than 3 days have pas-
sed since you last made coffee (this
guarantees correct hygiene of the
machine).
Empty the waste coffee container and clean,
then replace.
Important: when removing the drip tray, the wa-
ste coffee container MUST be emptied, even if it
is not completely full.
If this is not done, when you make the next cof-
fees, the waste coffee container may fill up more
than expected and clog the machine.
INSERT WASTE COFFEE CONTAINER
After cleaning, the waste coffee con-
tainer has not been replaced.
Open the service door and insert the waste coffee
container.
INSERIRE CAFFÈ PRE-MACINATO
The “pre-ground coffee” function has
been selected without placing any
pre-ground coffee in the funnel.
The funnel (A21) is blocked.
Extract the appliance and place pre-ground cof-
fee in the funnel.
Empty the funnel with the help of a knife as de-
scribed in the section “Cleaning the pre-ground
coffee funnel”.
PLEASE DESCALE!
The machine must be descaled.
The descaling procedure described in the “Desca-
ling” section needs to be performed as soon as
possible.
LESS COFFEE
Too much coffee has been used.
Select a milder taste or reduce the quantity of
pre-ground coffee, then make the coffee again.
FILL BEAN CONTAINER
The coffee beans have run out.
Fill bean container
INSERT BREWING UNIT
The brewing unit has not been repla-
ced after cleaning.
Insert the brewing unit as described in the sec-
tion “Cleaning the brewing unit”.
CLOSE DOOR
The service door is open
Close the service door.
GENERAL ALARM!
The inside of the appliance is very
dirty.
Clean the inside of the appliance thoroughly, as
described in the section “Cleaning and mainte-
nance”.
If the message is still displayed after cleaning,
contact a customer services.
DISPLAYED MESSAGES
