Instructions for the User
17
5. DESCRIPTION OF FRONT PANEL CONTROLS
All the cooker's control and monitoring devices are placed together on the front panel. The table below
provides the key to the symbols used.
FRONT RIGHT-HAND BURNER
CENTRAL BURNER
REAR RIGHT-HAND BURNER
GAS OVEN THERMOSTAT
REAR LEFT-HAND BURNER
ELECTRIC OVEN THERMOSTAT
FRONT LEFT-HAND BURNER
ELECTRIC OVEN FUNCTION KNOB
BURNER IGNITION BUTTON
REAR CENTRAL BURNER
FRONT CENTRAL BURNER
OVEN LIGHT SWITCH
If the cooker is equipped with an electronic programmer, before using the oven check that the
symbol appears on the display; see point “8.1 Setting the time".
BURNER IGNITION BUTTON
(ON SOME MODELS ONLY)
On models fitted with this button, to light the flame, turn the burner
ignition knob anti-clockwise to the minimum flame symbol while
pressing it down. To adjust the flame, turn the knob to the zone
between the maximum and the minimum settings. To turn off
the burner, turn the knob to the
position.
HOB BURNER CONTROL KNOB
On models without burner ignition button, to light the flame press down the
knob and turn it anti-clockwise to the minimum flame setting . To adjust the
flame, turn the knob to the zone between the maximum
and the minimum
settings. To turn off the burner, turn the knob to the
position.
GAS OVEN THERMOSTAT AND GRILL ELEMENT KNOB
(ON SOME MODELS ONLY)
This knob turns on the gas supply to light the burner inside the oven, or
operates the grill/rotisserie function. The gas oven cooking temperature is set
by turning the knob anti-clockwise to the value required, between
Min
. and
275°C.
For instructions for lighting the gas oven, refer to point “
7.2
Using the gas
oven”.
