background image

Presentation 

 

 

 

ALWAYS KEEP HOLD OF THE HOB'S GLASS LID WHEN LOWERING IT. 
WARNING: 

THE GLASS LID MAY SHATTER IF OVERHEATED. 

TURN OFF ALL THE BURNERS AND WAIT FOR THEM TO COOL BEFORE CLOSING IT. 

 

 

   
 

THE APPLIANCE BECOMES VERY HOT DURING USE.

 TAKE CARE NOT TO TOUCH THE 

HEATING ELEMENTS INSIDE THE OVEN. 

 

 

   
 

THE APPLIANCE IS INTENDED FOR USE BY ADULTS.

 KEEP CHILDREN AT A SAFE 

DISTANCE AND NEVER ALLOW THEM TO PLAY WITH IT. 
WHEN THE GRILL IS IN OPERATION, ACCESSIBLE PARTS MAY BECOME VERY HOT: 

KEEP 

CHILDREN AT A SAFE DISTANCE.

 

 

 

   
  IF THE APPLIANCE IS MOUNTED ON A STAND, IT MUST BE INSTALLED IN SUCH A WAY 

THAT IT CANNOT SLIP OFF. 

 

 

   

INSTALL THE APPLIANCE SO THAT WHEN DRAWERS OR DOORS OF UNITS INSTALLED AT 
HOB HEIGHT ARE OPENED, ACCIDENTAL CONTACT WITH PANS ON THE HOB IS NOT 
POSSIBLE.  

 

 

 

   

THIS APPLIANCE IS TAGGED UNDER EUROPEAN DIRECTIVE 2002/96/EC ON WASTE 
ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE). 

 

THIS DIRECTIVE CONTAINS THE REGULATIONS GOVERNING THE COLLECTION AND 
RECYCLING OF DECOMMISSIONED APPLIANCES THROUGHOUT THE EUROPEAN UNION. 

 

 

   
  BEFORE THE APPLIANCE IS PUT INTO OPERATION, ALL THE LABELS AND PROTECTIVE 

FILMS APPLIED INSIDE OR OUTSIDE MUST BE REMOVED. 

 

 

   

5

 

The manufacturer declines all responsibility

 for injury or damage caused by failure to comply with 

the above regulations or deriving from tampering with even just one part of the appliance and the 
use of non-original spare parts. 

 

Summary of Contents for CB61VES






























Reviews: