background image

Service Manual

Order No. PHAT070802S3

Electric Rice Cooker/Steamer

Model : SR-TEJ10, SR-TEJ18

SIN-RBD

©  2007  Panasonic  Home  Appliance  (Thailand)  Co.,Ltd 

All rights reserved. Unauthorized copying and distrbution  

is a violation of law. 

Specification 

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general public.

It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.

Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or 

repair the product or products dealt with in this service information by anyone else could result in serious injury or death.

There are special components used in this equipment which are important for safety. These parts are marked by   in the Schematic

Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced 

with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of 

manufacturer.

IMPORTANT SAFETY NOTICE

Model

SR-TEJ10

SR-TEJ18

Power source

AC 220V 50Hz

Power 

cooking

450W

630W

Power 

warming

32W

33W

Cooking capacity

1 ~ 5 cups

3 ~ 10 cups

Keep warm capacity

1 ~ 5 cups

3 ~ 10 cups

Center thermostat working temperature

134 ºC ± 6ºC

134 ºC ± 6ºC

Thermal fuse specification

142ºC

142ºC

Power 

cord

1.0 m

1.0 m

Dimension

Width x Depth x Height 

248 mm x 274 mm x 275 mm

Width x Depth x Height 

276 mm x 274 mm x 275 mm

Weight

2.5 kg

3.1 kg

Accessories

Steaming basket, Scoop, Measuring cup

Please use this manual together with Service Manual Order No.PHAT060410C3

SUPPLEMENT

Summary of Contents for SR-TEJ10













Reviews: