3.6 External devices description
AC-M1 can be connected to the following external devices.
3.6.1 Encoder
A Hall-effect 64-pulse quadrature encoder manufactured by SME is coaxially enclosed in
the AC motors in order to provide a closed-loop control of the torque and the speed (see
the appendix “General technical overview of SME technology” for more details).
AC-M1 control board provides both a 5V power supply (pin K2-1) and a 12V power supply
(pin K1-21).
Both these power supplies are referenced to a dedicated ground terminal (pin K2-9).
To increase immunity use shielded cables and keep them separated from power leads.
Channel A has to be connected to pin K2-5 and Channel B to pin K2-4.
The environmental protection rating is IP65.
If you need to make use of other types of encoder, please contact SME in order to verify
the technical feasibility.
PRELIMINARY VERSION
23
Summary of Contents for AC-M1
