SMC Networks WPCI-G - annexe 1 Management Manual Download

Page: 173 / 846

ONFIGURING

OCAL

EMOTE

OGON

UTHENTICATION

6-5

Server IP Address

– Address of authentication server.

(Default: 10.1.0.1)

Server Port Number

– Network (UDP) port of authentication server

used for authentication messages. (Range: 1-65535; Default: 1812)

Secret Text String

– Encryption key used to authenticate logon

access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)

Number of Server Transmits

– Number of times the switch tries to

authenticate logon access via the authentication server. (Range: 1-30;
Default: 2)

Timeout for a reply

– The number of seconds the switch waits for a

reply from the RADIUS server before it resends the request.
(Range: 1-65535; Default: 5)

• TACACS Settings

Server IP Address

– Address of the server.

(Default: 10.11.12.13)

Server Port Number

– Network (TCP) port of server

used for authentication messages. (Range: 1-65535; Default: 49)

Secret Text String

– Encryption key used to authenticate logon

access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)

Note:

The local switch user database has to be set up by manually
entering user names and passwords using the CLI. (See
“username” on page 22-2.)

Summary of Contents for WPCI-G - annexe 1















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WPCI-G - annexe 1

Reviews:

Related manuals for WPCI-G - annexe 1

Brands by name

Popular brands

SMC Networks WPCI-G - annexe 1, Management Manual

Search results

Summary of Contents for WPCI-G - annexe 1

Reviews:

Related manuals for WPCI-G - annexe 1

Brands by name

Popular brands