SMC Networks WPCI-G - annexe 1, Management Manual

Page: 690 / 846

Q
UALITY OF
S
ERVICE
C
OMMANDS
32-4
Example
This example creates a class map call “rd_class,” and sets it to match
packets marked for DSCP service value 3:
Related Commands
show class map (32-11)
match
This command defines the criteria used to classify traffic. Use the no form
to delete the matching criteria.
Syntax
[ no ] match { access-list acl-name | ip dscp dscp | ip precedence
ip-precedence | vlan vlan }
• acl-name - Name of the access control list. Any type of ACL can be
specified, including standard or extended IP ACLs and MAC ACLs.
(Range: 1-16 characters)
• dscp - A DSCP value. (Range: 0-63)
• ip-precedence - An IP Precedence value. (Range: 0-7)
• vlan - A VLAN. (Range:1-4094)
Default Setting
None
Command Mode
Class Map Configuration
Command Usage
• First enter the class-map command to designate a class map and
enter the Class Map configuration mode. Then use the match
command to specify the fields within ingress packets that must match
to qualify for this class map.
• Only one match command can be entered per class map.
Console(config)#class-map rd_class match-any
Console(config-cmap)#match ip dscp 3
Console(config-cmap)#