P
RIORITY
C
OMMANDS
3-123
VLAN, these frames are stripped of all VLAN tags prior to
transmission.)
Example
The following example shows how to set a default priority on port 3 to 5:
queue bandwidth
Use this command to assign Weighted Round-Robin (WRR) weights to the
four class of service (CoS) priority queues. Use the
no
form to restore the
default weights.
Syntax
queue bandwidth
weight1...weight4
no queue bandwidth
weight1...weight4
- The ratio of weights for queues 0 - 3 determines
the weights used by the WRR scheduler. (Range: 1 - 255)
Default Setting
Weights 16, 64, 128 and 240 are assigned to queue 0, 1, 2 and 3
respectively.
Command Mode
Global Configuration
Command Usage
WRR allows bandwidth sharing at the egress port by defining
scheduling weights.
Example
The following example shows how to assign WRR weights of 1, 3, 5 and 7
to the CoS priority queues 0, 1, 2 and 3:
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config)#queue bandwidth 1 3 5 7
Console(config)#
Summary of Contents for TigerSwitch SMC8624T
