F
LASH
/F
ILE
C
OMMANDS
3-19
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The system prompts for data required to complete the copy command.
• The destination file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the length
of file name should be 1 to 31characters. (Valid characters: A-Z, a-z,
0-9, “.”, “-”, “_”)
• The number of user-defined configuration files is limited only by
available Flash memory space.
• You can use “Factory_Default_Config.cfg” as the source to copy from
the factory default configuration file, but you cannot use
“Factory_Default_Config.cfg” as the destination.
• To replace the startup configuration, you must use startup-config as the
destination.
• The Boot ROM image cannot be uploaded or downloaded from the
TFTP server. You must use a direct console connection and access the
download menu during a boot up to download the Boot ROM (or
diagnostic) image. See “Upgrading Firmware via the Serial Port” on
page A-2 for more details.
Example
The following example shows how to upload the configuration settings to
a file on the TFTP server:
Console#copy file tftp
Choose file type:
1. config:
2. opcode: <1-2>: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
/
Console#
Summary of Contents for TigerSwitch SMC8624T
