SMC Networks TigerSwitch 10/100 SMC6724L2, Management Manual

Page: 92 / 176

W
EB
I
NTERFACE
3-8
Main Menu
Using the onboard Web agent, you can define system parameters,
manage and control the switch, and all its ports, or monitor
network conditions. The interface screen includes the main menu
on the left side, the menu bar beneath the image of the switch,
and a list of commands beneath the menu bar. The following table
briefly describes the selections available from this program.
Menu Description
System Information Menu
System Information Provides basic system description, including
contact information.
Switch Information Shows hardware/firmware version numbers,
power status, and expansion modules used in
the switch.
Management Setup Menu
Network Configuration Configures the switch’s network parameters.
Serial Port
Configuration Sets communication parameters for the serial
port, including baud rate, console timeout, and
screen data refresh interval.
SNMP Configuration Activates authentication failure traps, configures
community access strings and trap managers.
User Configuration Sets the user names and passwords for system
access.
TFTP Download Downloads new version of firmware to update
your system (in-band).
Configuration File Saves or restores configuration data based on
the specified file.
Device Control Menu
Layer 2 Menu Configures port communication mode, mirror
ports, port trunking, and static addresses.
Bridge Menu Configures GMRP and GVRP for the bridge, as
well as Spanning Tree settings for the global
bridge or for specific ports.