SMC Networks TigerSwitch 10/100 SMC6724L2, Management Manual

Page: 49 / 176

D
EVICE
C
ONTROL
M
ENU
2-35
Configuring the Static Unicast Address Table
The Static Unicast Address Table can be used to assign the MAC
address for a host device to a specific port on this switch. Static
unicast addresses are never aged out, and cannot be learned on
another port. If any packets with a source address specified in this
table enter another port, they will be dropped. The Static Unicast
Address Table is described in the following figure and table.
Notes: 1. To assign a MAC address to a specific port, use <Add>.
To delete or modify an address, highlight it with the
cursor and select Enter.
2. To scroll through the address table, use the <Next Page>
and <Prev Page> buttons.
3. To display a specific page, set the page number in the
Page field and then select <Apply>.
Layer 2 Address Table: Static Address Table
=====================
Address Port Address Port
30-30-30-30-30-30 1
Page 1 <Apply> Total 1 Pages
<OK> <Next Page> <Prev Page> <Add>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
Address The MAC address of a host device attached to this switch.
Port The switch port to which the host device is attached.