SMC Networks SMC9432BTX, User Manual

Page: 38 / 76

3-14
I
NSTALLING AND
C
ONFIGURING
N
ETWORK
D
RIVERS
5. At this point, a protocol must be bound to the driver. For
example:
BIND IPX TO SMCPWR2 NET=XX
where xx is the logical network address for the frame type
indicated in your load command.
Driver Command Line Parameters
Optional command line parameters are described in the NetWare
v3.12 server driver installation document on the SMC SuperDisk.
Note that the EtherPower II 10/100 network card is
preprogrammed with Auto-Negotiate on the UTP port as the
default configuration. The preprogrammed configuration can be
changed by running EZStart. Some command line parameters are
used to override the default configuration. In the absence of such
parameters, the default configuration will be used by the NetWare
driver.