SMC Networks PBX10 FICHE, User Manual

Page: 82 / 132

70
be given by the service provider side so that a
correct stripping could be configured accordingly.
DID Prefix A digit string to be prefixed to the incoming called
number after stripping.
DID Stripping A number of leading digits to be stripped from the
original called number. If prefix or stripping has been
given but DID of Extension is not By Number or By
Privilege , the result of digit manipulation is dialed in a
DTMF string after the call has been answered by the
DID extension as an automatic 2
nd
dialing. Click All to
strip all digits of the original called number.
IVR List
21
Associate an IVR menu with incoming calls to this
trunk. This is mandatory unless the trunk is configured
for DID. Leave it blank and the system will
automatically create an IVR for the trunk.
Usergroup
22
of Privilege When disabled DID, click a usergroup in the list whose
reachability to other usergroups and trunks will be used
as the privilege of inbound calls from this trunk.
# There may not be any appropriate usergroups to
select initially. One can come back later to revise
it, once the expected usergroups are added.
Advanced Settings Select to see more settings shown below.
Input/Output Gain Voice amplification or attenuation in dB scale to adjust
input/output volume of a PSTN line.
Minimum Disconnection Tone Minimum volume level of the disconnection tone. If a
PSTN trunk is found to have disconnection problem
and voice sounds low, choose a lower dB.
Delay Before/After Answering Delay in seconds before and after answering a call
from PSTN trunk.
Call Time Restriction Enter a number (1-1440) in minute to limit the call
period. If a call lasts longer than the time, IP PBX will
hang up the phone. Enter 0 or leave it blank to disable
the function.
1st Frequency Of On-cycle Tone Enter a number in Hz for call disconnection on-cycle
21
Please refer to 7.11 for details.
22
Please refer to 6.2 for details.