98
!
Data: 8 bit
!
Parity:
none
!
Stop: 1 bit
!
Flow Control: none
4. Click
OK
to connect.
9.2.2.2 Login
Type in the login username and password (both are
estcli
).
9.2.2.3 Basic Commands
This section describes basic command lines for general users.
Help
Display the help message command available for the level.
CLI
Command:
help / ?
Quit / Logout
Enter the command to Logout CLI.
CLI
Command:
quit / logout
Exit
Exit the current level and go back to the previous level. If you are in the basic level, the
console interface will logout. If you are in admin level, enter this command will disable and
back to basic level.
CLI
Command:
exit
History
Displays the commands you entered before. You can also press
↑
↓
on the keypad to
show the used commands.
CLI
Command:
history
Enable
Enter the admin level. The system will request for a password. The password is the same
as the administrator’s password for web interface. Admin level allows to enter Admin and PBX
Commands.
CLI Command:
enable
Note:
Make sure to log out the administrator in the web interface, or the command will
Summary of Contents for PBX10 FICHE
Page 1: ...SMCPBX10 TigerVoIP IP PBX Telephony System USER GUIDE TM...
Page 2: ......
Page 132: ...SMCPBX10...
