SMC Networks PA3000 Series, Manual, Page: 15 / 29

Specifications
Model
PA3310 PAP3310 PA3313 PAP3313
Automatically operated
1 to 13
l
/min
Note 1)
—
Rc, NPT, G, NPTF 3/8"
Female thread
Rc, NPT, G, NPTF 3/8" Female thread
3/8", 1/2" Tube extension
With nut (size 3, 4, 5)
3/8", 1/2" Integral fitting type
Rc, NPT, G, NPTF 3/8"
Female thread
Rc, NPT, G, NPTF 3/8" Female thread
3/8", 1/2" Tube extension
With nut (size 3, 4, 5)
3/8", 1/2" Integral fitting type
Air operated
0.1 to 9
l
/min
80 dB (A) or less (Option: with silencer, AN200) 75 dB (A) or less (excluding the noise from the quick exhaust and solenoid valve)
2 to 4 Hz
Rc, NPT, G, NPTF 1/4" Female thread
New PFA
PTFE
PTFE, New PFA
0 to 0.4 MPa
0.2 to 0.5 MPa
140
l
/min (ANR) or less
0.5 m (Interior of pump dry)
Up to 4 m (liquid inside pump)
0.75 MPa
50 million times
0 to 100
°
C (No freezing, heat cycle not applied)
0 to 100
°
C (No freezing, heat cycle not applied)
2.1 kg (without foot)
Horizontal (with mounting foot at bottom)
Actuation
Port size
Material
Discharge rate
Average discharge pressure
Pilot air pressure
Pilot air consumption
Noise
Withstand pressure
Diaphragm life
Fluid temperature
Ambient temperature
Recommended operating cycle
Mass
Mounting orientation
Packaging
Main fluid suction
discharge port
Pilot air supply/exhaust port
Body wetted areas
Diaphragm
Check valve
Dry
Wet
General environment Clean double packaging General environment Clean double packaging
∗
Each value of above represents at normal temperatures with fresh water.
∗
Refer to page 727 for maintenance parts.
∗
For related products, refer to page 728 and 729.
Note 1) The discharge rates for PA(P)3310-P11, PA(P)3310S-
첸
S11, PA(P)3310S-
첸
S1113, PA(P)3310S-
첸
S1311, PA(P)3310-S11 are between 1 to 12
l
/min.
Suction
lifting range
684
Series
PAP3000