These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
“Danger.”
They are all important
(ISO/IEC)
*1)
*1) ISO 4414:
ISO 4413:
IEC 60204
ISO 10218
etc.
Caution
Warning
Danger
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
necessary analysis and tes
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
equipment.
2. Only personnel with appropriate training should operate machinery and equipment.
The product specified
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove pr
confirmed.
1.The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
2.When the product is to be
and the power from any appropriate source is cut, and read and understand the specific product
precautions
of all relevant products carefully.
3. Before machinery/equipment is
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
1. Conditions and environments outside o
direct sunlight.
2. Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recrea
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
3. An application which could have negative effects on people, property, or animals requiring special safety
analysis.
4.Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
mechanical protective funct
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
They are all important
*1)
, and other safety regulations.
*1) ISO 4414: Pneumatic fluid power
ISO 4413: Hydraulic fluid power
IEC 60204-1: Safety of machinery
18-1992: Manipulating industrial robots
Caution
Warning
Danger
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
necessary analysis and tes
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
equipment.
2. Only personnel with appropriate training should operate machinery and equipment.
The product specified
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove pr
confirmed.
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be
and the power from any appropriate source is cut, and read and understand the specific product
precautions
of all relevant products carefully.
Before machinery/equipment is
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
Conditions and environments outside o
direct sunlight.
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recrea
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
analysis.
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
mechanical protective funct
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
They are all important notes for safety and must be followed in addition to International Standards
, and other safety regulations.
Pneumatic fluid power -- General rules relating to systems
Hydraulic fluid power -- General rules relating
Safety of machinery --
Manipulating industrial robots
Caution
Caution
in minor or
Warning
Warning
result in death or serious injury.
Danger
in death or
1. The compatibility of the product is the responsibility of the person who designs the
equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
necessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
The product specified here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove pr
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
of all relevant products carefully.
Before machinery/equipment is
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
Conditions and environments outside o
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recrea
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
, and other safety regulations.
General rules relating to systems
General rules relating
Electrical equipment of machines
Manipulating industrial robots -Safety.
Caution
indicates a hazard with a low level of risk which, if not avoided, could result
in minor or moderate injury.
Warning
indicates a hazard with a
death or serious injury.
indicates a hazard with a
or serious injury.
1. The compatibility of the product is the responsibility of the person who designs the
specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
t results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove pr
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
of all relevant products carefully.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
Conditions and environments outside of the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recrea
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
ion, and periodical checks to confirm proper operation.
3
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
General rules relating to systems
General rules relating to systems
Electrical equipment of machines
Safety.
indicates a hazard with a low level of risk which, if not avoided, could result
rate injury.
indicates a hazard with a
death or serious injury.
indicates a hazard with a
injury.
Warning
1. The compatibility of the product is the responsibility of the person who designs the
specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
has determined its compatibility with the product.
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove product and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
to be used in any of the following conditions.
f the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recrea
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
ion, and periodical checks to confirm proper operation.
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
General rules relating to systems.
to systems.
Electrical equipment of machines .(Part 1:
indicates a hazard with a low level of risk which, if not avoided, could result
indicates a hazard with a medium level of risk which, if not avoided, could
indicates a hazard with a high level of risk which, if not avoided,
Warning
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
here may become unsafe if handled incorrectly.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
oduct and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
f the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
ion, and periodical checks to confirm proper operation.
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
(Part 1: General requirements)
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided,
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
This person should also continuously review all specifications of the product referr
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
The assembly, operation and maintenance of machines or equipment including our products must be
performed by an operator who is appropriately trained and experienced.
oduct and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
f the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
tion, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
ion, and periodical checks to confirm proper operation.
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
General requirements)
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided,
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
This person should also continuously review all specifications of the product referring to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
The assembly, operation and maintenance of machines or equipment including our products must be
oduct and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
f the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
tion, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
ion, and periodical checks to confirm proper operation.
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
level of risk which, if not avoided, will result
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ing to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
2. Only personnel with appropriate training should operate machinery and equipment.
The assembly, operation and maintenance of machines or equipment including our products must be
oduct and machinery/equipment until safety is
The inspection and maintenance of machinery/equipment should only be performed after measures to
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
f the given specifications, or use outdoors or in a place exposed to
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
tion, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalog.
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or
notes for safety and must be followed in addition to International Standards
indicates a hazard with a low level of risk which, if not avoided, could result
level of risk which, if not avoided, could
result
1. The compatibility of the product is the responsibility of the person who designs the
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based on
The expected performance and safety assurance of the equipment will be the responsibility of the person who
ing to its latest catalog
information, with a view to giving due consideration to any possibility of equipment failure when configuring the
The assembly, operation and maintenance of machines or equipment including our products must be
oduct and machinery/equipment until safety is
removed, confirm that the safety measures as mentioned above are implemented
and the power from any appropriate source is cut, and read and understand the specific product
restarted, take measures to prevent unexpected operation and malfunction.
4. Contact SMC beforehand and take special consideration of safety measures if the product is
f the given specifications, or use outdoors or in a place exposed to
An application which could have negative effects on people, property, or animals requiring special safety
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
