![background image](http://html1.mh-extra.com/html/smc-networks/leg-series/leg-series_manual_1299655005.webp)
Menu
Axis 1
Step data
Parameter
Test
Step
Axis 1
Step No.
0
Movement MOD
Test DRV
Axis 1
Step No.
1
Posn 123.45 mm
Stop
Out mon
Axis 1
BUSY[ ]
SVRE[ ]
SETON[ ]
“Normal Mode” for detailed setting
¡
Step data setting, parameter
setting, monitoring, teaching,
etc., are displayed in different
windows.
Step data
setting window
Parameter
setting window
Monitoring window
Teaching window
Controller setting software
<When a PC is used>
Main menu screen
Step data
setting screen
Test screen
Monitoring screen
Select “Normal Mode” when detailed setting is required.
<When a TB (teaching box) is used>
Teaching box screen
¡
Step data can be set in detail.
¡
Signals and terminal status can be monitored.
¡
Parameters can be set.
¡
JOG and constant rate movement, return to origin, test drive, and testing of forced output can be performed.
¡
Multiple step data can be
stored in the teaching box and
transferred to the controller.
¡
Continuous test drive by up to
5 step data
¡
Each function (step data setting,
test drive, monitoring, etc.) can
be selected from the main menu.
The actuator and controller are provided as a set.
(They can be ordered separately as well.)
Confirm that the combination of the controller and actuator is correct.
<Check the following before use.>
q
Check the actuator label for the model number. This number should match that of the controller.
w
Check that the Parallel I/O configuration matches (NPN or PNP).
q
w
Controller
Actuator
w
q
4
Controllers
JXC
m
Series