![background image](http://html1.mh-extra.com/html/smc-networks/leg-series/leg-series_manual_1299655037.webp)
36
q
w
How to Order
High Performance
Step Motor Controller
JXCEH/9H/PH
Series
A blank controller is a controller to which the customer can write the data of the actuator it is to be combined and used with. Use the
dedicated software (JXC-BCW) for data writing.
• Please download the dedicated software (JXC-BCW) via our website.
• Order the communication cable for controller setting (JXC-W2A-C) and USB cable (LEC-W2-U) separately to use this software.
SMC website: https://www.smcworld.com
Precautions for blank controllers (JXC
m
H
m
-BC)
*
Refer to the “Operation Manual” for using the products. Please download it via our website: https://www.smcworld.com
Caution
[CE/UKCA-compliant products]
q
EMC compliance was tested by combining the
electric actuator LE series and the JXCEH/PH
series.
The EMC depends on the configuration of the
customer’s control panel and the relationship
with other electrical equipment and wiring.
Therefore, compliance with the EMC directive
cannot be certified for SMC components incor-
porated into the customer’s equipment under
actual operating conditions. As a result, it is
necessary for the customer to verify compli-
ance with the EMC directive for the machinery
and equipment as a whole.
w
For the JXCEH/PH series (step motor control-
ler), EMC compliance was tested by installing
a noise filter set (LEC-NFA).
Refer to page 40 for the noise filter set. Refer
to the JXCEH/PH Operation Manual for instal-
lation.
JXC
7
P
High performance
Communication
protocol
E
EtherCAT
9
EtherNet/IP™
P
PROFINET
H
*
1 The DIN rail is not included. It
must be ordered separately.
(Refer to page 40.)
Mounting
7
Screw mounting
8
*
1
DIN rail
Actuator part number
Without cable specifications and actuator options
Example: Enter “LEG32MDGB-30” for the
LEG32MDGB-30C-R1C
m
1
mm
.
BC
Blank controller
*
1
*
1 Requires dedicated software (JXC-BCW)
For details, refer to page 43 and onward.
Confirm that the combination of the controller and actuator is correct.
The controller is sold as single unit after the compatible actuator is set.
<Check the following before use.>
q
Check the actuator label for the model number. This number should match that
of the controller.
w
Check that the Parallel I/O configuration matches (NPN or PNP).
LEG
Series
JXC5H/6H
Series
JXCEH/9H/PH
Series
Mo
del
S
ele
ction
Auto Switch
Sp
eci
fic
Pr
o
d
uc
t
Pr
ec
au
tions