３０
b. High voltage cable holder (elbow)
·
Use the cable holder when bending the high voltage cable through 90 degree.
·
Use cross recessed round head screws for fixing the high voltage cable holder. (The screws should be
prepared by the user. Fixed part thickness 3.8mm, Recommended mounting screw is cross recessed
pan head screw M4x8.)
·
When they are used in layers, select the screw length considering the thickness of the high voltage
cable holder (14.8 mm/holder).
·
When holding the high voltage cable to the cable holder, align the cable in the holding position and
mount it by pressing the cable.
Installation example 1
Installation example 2
Installation example 3
M4 screw
IZT40-E2
High voltage
cable holder
(elbow)
M4 screw
High voltage cable
Holding
position
Holding
position
M4 screw
IZT40-E2
High voltage
cable holder
(elbow)
Holding position
High voltage cable
M4 screw
IZT40-E2
High voltage
cable holder
(elbow)
High voltage cable
Holding position
High voltage cable
