![background image](http://html1.mh-extra.com/html/smc-networks/idf22e-20-a/idf22e-20-a_operation-manual_1299710014.webp)
IDX-OM-W025
Air Dryer
1 Name and Functions Parts
1-1 Parts Name and Functions
1
-
1
IDF Series
Front
Terminal block
You can see the terminal block when you remove front panel. Connect the power
cablethrough the rubber grommet.
IDF22E-20, IDF37E-20
IDF22E-30, IDF37E-30, IDF55E-30,
(Single phase AC200V)
IDF75E-30
(3 phase AC200V)
1
Parts Name and Functions
1-1 Parts Name and Functions
・
IDF22E to 75E
Auto Drain
Check if drained
correctly once a day.
Compressed Air (OUT)
Compressed Air (IN)
Ball Valve
L N PE
(
)
Customer Connection Side
Terminal Connecting Screw: M3
Applied Pressure Terminal: 1.25-3
(Width 6.5mm and below)
Thermal relay
(The thermal relay is
placed at the inside of
a front panel.) Refer to
page 5-2 to reset the
thermal relay.
L1
L2
L3 PE
(
)
High pressure switch
(Only for IDF55E and IDF75E)
(The high pressure switch is
placed at the inside of a front
panel.) Refer to page 5-2 to reset
the high pressure switch.
Switch with Lamp
(ON/OFF Switch)
The lamp is continuously ON
during normal operation. Use it
for ON/OFF operations.
Evaporation
thermometer
(EVAPORATING TEMP)
Indicates the temperature
of refrigerant of
low-pressure side.
During normal driving, it
indicates in the green
zone.
Drain Tube
Discharges drain.
Right Side Ventilation
Grille (Outlet)
Waste heat will be exhausted
as hot air by the fan motor. Do
not block with wall and so on.
Front panel mounting screw
It can be found at left side and front side for the IDF55E, which
has one screw for right and left each (6 pcs in total).
Customer Connection Side
Terminal Connecting Screw: M3
Applied Pressure Terminal: 1.25-3
(Width 6.5mm and below)