MODEL ADH DC
AUTOMATIC AIR DEHYDRATOR WITH AC POWER SUPPLY
QUICK REFERENCE INSTALLATION GUIDE | PART NO.
25548
REV
0.0
PART NO. DESCRIPTION
QTY.
25527
25548
18198
23428
14513
23245
24567
10641
ADH NETCOM, DC
ADH NETCOM Installation Sheet (this document)
1/8” NPT to 1/4” Barbed Brass Fitting
1/8” NPT to 3/8” Barbed Brass Fitting
1/8" NPT to 1/4" Barbed Elbow Brass Fitting
Mounting Bracket
Self-Locking Rack-mounting screw (#8-32)
#8 Split Washer
1
1
1
1
1
4
8
8
Connect feed hose to 1/8” NPT outlet using 1/4” or
3/8” barbed fitting supplied.
Connect required data and alarm relay ports. RS-422
and RS-232 ports may require configuration changes
via the web interface. See Instruction Manual for
more information.
Connect AC power. System can be connected to 100
VAC – 240 VAC power without requiring any
configuration change.
1.
2.
3.
CONNECTIONS
UNIT DOES NOT HAVE POWER SWITCH. SYSTEM WILL START WHEN POWER IS APPLIED.
The ADH NETCOM Automatic Dehydrator with AC Power is permanently connected
equipment and does not have an internal disconnect device. A readily accessible disconnect
device, short circuit, and current protection shall be provided and are not supplied by ETI When
power is applied, the system will start.
