QuickServer Start-Up Guide
Page 46 of 46
Appendix D.4. QuickServer FS-QS-101X DCC
Driver
Code
BACnet/IP
– BACnet MS/TP
0285
BACnet/IP
– LonWorks
0131
JCI Metasys N2
7
– LonWorks
0097
JCI Metasys N2
– BACnet MS/TP
0309
JCI Metasys N2
– BACnet/IP
0122
Modbus RTU
– BACnet MS/TP
0367
Modbus RTU
– BACnet/IP
0104
Modbus RTU
– JCI Metasys N2
0038
Modbus RTU
– LonWorks
0085
Modbus TCP
– BACnet/IP
0237
Modbus TCP
– LonWorks
0154
Modbus TCP
– BACnet MS/TP
0419
Modbus TCP
– JCI Metasys N2
0117
SNMP
– BACnet/IP
0333
SNMP
– LonWorks
0337
SNMP
– JCI Metasys N2
0150
Add BACnet MS/TP - LonWorks 0345
Appendix D.5. Compliance with UL Regulations
For UL compliance, the following instructions must be met when operating ProtoNode.
The units shall be powered by listed LPS or Class 2 power supply suited to the expected
operating temperature range.
The interconnecting power connector and power cable shall:
o
Comply with local electrical code
o
Be suited to the expected operating temperature range
o
Meet the current and voltage rating for ProtoNode/Net
Furthermore, the interconnecting power cable shall:
o
Be
of length not exceeding 3.05m (118.3”)
o
Be constructed of materials rated VW-1, FT-1 or better
If the unit is to be installed in an operating environment with a temperature above 65 °C, it should
be installed in a Restricted Access Area requiring a key or a special tool to gain access.
This device must not be connected to a LAN segment with outdoor wiring.
7
Metasys is a registered trademark of Johnson Controls Inc.