QuickServer Start-Up Guide
Page 44 of 46
Appendix D.2. FS-QS-1010-XXXX LED Functions
LED
Description
Run
The Run LED will start flashing 20 seconds after power indicating normal operation.
The
Heart Beat
LED has the same functionality but flashes more rapidly.
Sys/
Config
Error
The Sys/Config Error LED will go on solid 15 seconds after power up. It will turn off after 5
seconds. A steady red light will indicate there is a system error on the unit. If this occurs,
immediat
ely report the related “system error” shown in the error screen of the GUI interface
to Sierra Monitor for evaluation.
Node
Offline
The Node Offline LED will turn on and stay solid if there is no communication with the
device.
RX
The RX LED will flash when a message is received on the field port.
TX
The TX LED will flash when a message is sent on the field port.
PWR
This is the power light and should show steady green at all times when the unit is powered.
Figure 28: FS-QS-1010-XXXX LEDs