H
ARDWARE
I
NSTALLATION
2-4
System Requirements
The EZ Connect ADSL USB Modem requires the following PC features
to operate:
•
A host PC that supports the Universal Serial Bus
•
32 MB of RAM and 10 MB of hard disk space
•
Windows 98, 98SE, 2000, XP, or Macintosh 9.x
•
Standard telephone cable with RJ-11 plugs
Note:
To share Internet access on your network, you will need to install
appropriate Internet-sharing software on one PC.
The ADSL network must meet the following minimum requirements:
•
ADSL service from your local telephone company or have access to an
ADSL DSLAM (Digital Subscriber Line Access Multiplexer)
•
PC configured with fixed IP address or dynamic IP address assignment
via DHCP, Gateway server address, and DNS server address from
your telephone company or network administrator
Summary of Contents for EZ Connect SMC7003USB V.2
