![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-powerline-smchpav-eth2/ez-connect-powerline-smchpav-eth2_user-manual_1298976009.webp)
3
3 Hardware Overview
3.1 Ethernet Interface
Use one end of the network cable included in the box
to
connect to
the Ethernet
port (RJ-45) of the SMCHPAV-ETH2. Use the other end of the cable to connect
to the Ethernet port (RJ-45) of a computer or any other Ethernet-enabled
networking device.
3.2 Buttons
Figure 3-1 Side panel
Reset
: Restore the factory default settings.
Sync
: Activate network security. Refer to chapter 6 for more information.
3.3 LEDs
As shown in Figure 3-2, there are 3 LEDs on the front panel to indicate the status
of the adapter:
Summary of Contents for EZ Connect Powerline SMCHPAV-ETH2
