![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-powerline-smchpav-eth2/ez-connect-powerline-smchpav-eth2_user-manual_1298976024.webp)
18
The button on device B must be pressed within 1 minute.
3.
Wait for the SYNC process to complete.
The Power LED on both devices will blink evenly at 1-second intervals until the
operation succeeded or failed. If the connection succeeded, it illuminates
steadily. If an error occured, the Power LED on the ‘adder’ (Device B) blinks
unevenly until the SYNC button on the ‘adder’ (Device B) is pressed again or the
‘joiner’ (Device A) is reset by pressing the SYNC button down for more than 10
seconds.
Figure 6-1: Creating a Homeplug AV private network
6.2 Joining a Network
In this scenario a Powerline private network exists and a new device, the ‘joiner’,
should join the network. Any device on the existing Powerline network can
become the ‘adder’.
1. Press the SYNC button on the ‘joiner’ (new device) for at least
3 seconds.
2.
Press the SYNC button on any network device for less than 3
seconds, making it the ‘adder’ (existing device). Please press
this SYNC button within 1 minute.
3.
Wait for the connection to complete.
The Power LED on both devices will blink evenly at 1-second intervals until the
operation succeeded or failed. If the connection succeeded, it illuminates
steadily. If an error occured, the Power LED on the ‘adder’ blinks unevenly until
Summary of Contents for EZ Connect Powerline SMCHPAV-ETH2
