![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-powerline-smchpav-eth2/ez-connect-powerline-smchpav-eth2_user-manual_1298976016.webp)
10
edit it in the list.
Password
By default, this column is blank. You can select a device and click
Enter
Password
to change it (see below).
Quality
This shows the signal quality in form of a progress bar.
Rate (Mbps)
This column indicates the current data rates in Mbps.
MAC Address
The last column shows the MAC address of the each device.
Enter Password
The password is necessary to activate security in the Powerline network and to
control all HomePlug AV devices from one computer. To activate security you
need to create a so-called “private network” by changing the private network
name in all HomePlug AV devices. This will only be possible after entering the
password for all these devices.
The procedure for setting the password of the device (required when creating a
private network) is as follows:
z
Click the device name to select the device in the lower panel.
z
Click
Enter Password
. A dialog box appears, showing the device name,
MAC address and a field to enter the password. See Figure 5-2.
Summary of Contents for EZ Connect Powerline SMCHPAV-ETH2
