-28-
No.EX##-OMI0001-E
No.
Element
Description
1
Branch connector on the SI unit side
Used to crimp branch connector (
) into branch cable (EX510-FC
)
and connected them to GW unit.
2
Load mounting connector
Connecting output equipment such as solenoid valve.
3 Power
supply
LED
Lights up: Power ON (Normal)
Goes off: Power OFF
4 Communication
LED
Lights up: Data received
Goes off: No data received
5
Mounting hole
Used to mount the unit with two M3 screws.
6
Connector locking pin inserted hole
Receiving connector locking pin (
).
7
Mounting bracket
Possible to mount on DIN rail.
8
Adapter cable assembly
Connects a plug-in valve manifold. (Only for EX510-S
02
)
∗
:
Only mounting direction of the SI unit to the mounting bracket is different between EX510-S
A and EX510-S
B. Mounting
direction can be changed from horizontal to vertical by changing the screws which construct the mounting bracket. Mounting direction
of the EX510-S
02C cannot be changed to vertical as the its mounting bracket is exclusive for horizontal mounting.