![background image](http://html1.mh-extra.com/html/smc-networks/ex510-gmj1-series/ex510-gmj1-series_operation-manual_1299776025.webp)
-24-
No.EX##-OMI0001-E
•
Profile area
GW unit has the function to detect lowering of power supply for output and to diagnose the condition
of input port monitor etc., and sends the detected result by using profile area shown below.
•
Low output power supply detecting function … Detecting the condition where power supply for
output decreases less than 20 V and then informing
it to CC-Link profile area.
This function doesn’t influence error state flag and
remote READY shown on the table below.
(Signal name on the table: Voltage decrease)
0: Normal
1: Abnormal
•
Input port monitoring function … Monitoring COM port of input and informing it to CC-Link profile
area.
(Signal name on the table: COM A, COM B, COM C, COM D)
0: Normal
1: Abnormal
•
Error state flag
…
0: Normal
1: GW unit is in start or stop condition
•
Remote READY
…
1: GW unit is in start condition
•
3 stations occupied
I/O memory map (in case of station No.1)
Ex.) “QJ61BT11N”
Buffer
memory
address
Remote input (RX)
RX4F … RX4C RX4B RX4A RX49
RX48
RX47 … RX43 RX42 RX41 RX40
E4H
Reserve (H)
COM D
COM C COM B COM A
Reserve (L)
Voltage
decrease
Reserve (L)
RX5F … RX5C RX5B RX5A RX59
RX58
RX57 … RX53 RX52 RX51 RX50
E5H
Reserve (L)
Remote
READY
Error
state flag
Reserve (L)
Reserve (L): Reserved bit (0 fixing), Reserve (H): Reserved bit (1 fixing)
•
2 stations occupied A
•
B mode
I/O memory map (in case of station No.1)
Ex.) “QJ61BT11N”
Buffer
memory
address
Remote input (RX)
RX2F … RX2C RX2B RX2A RX29
RX28
RX27 … RX23 RX22 RX21 RX20
E2H
Reserve (H)
COM D
COM C COM B COM A
Reserve (L)
Voltage
decrease
Reserve (L)
RX3F … RX3C RX3B RX3A RX39
RX38
RX37 … RX33 RX32 RX31 RX30
E3H
Reserve (L)
Remote
READY
Error
state flag
Reserve (L)
Reserve (L): Reserved bit (0 fixing), Reserve (H): Reserved bit (1 fixing)