![background image](http://html1.mh-extra.com/html/smc-networks/ex510-gmj1-series/ex510-gmj1-series_operation-manual_1299776021.webp)
-20-
No.EX##-OMI0001-E
•
Switch setting
1. Setting of address and communication speed (SW1)
The following setting is performed with the SW1.
•
Station number setting (Switch No.1 to 7)
Set tens digit of station number 10, 20 and 40, and set ones digit of station number 1, 2, 4 and 8.
All setting are turned OFF at shipment and no station number is set.
Make sure to set the station number in the range of 1 to 62 (with 3 stations occupied).
Tens digit (Switch No.)
Ones digit (Switch No.)
Station
number
40 (No.1)
20 (No.2)
10 (No.3)
8 (No.4)
4 (No.5)
2 (No.6)
1 (No.7)
1 OFF OFF OFF OFF OFF OFF
ON
2 OFF OFF OFF OFF OFF
ON
OFF
3 OFF OFF OFF OFF OFF
ON ON
4 OFF OFF OFF OFF
ON
OFF OFF
: : : : : : : :
10 OFF
OFF
ON
OFF OFF OFF OFF
11 OFF
OFF
ON
OFF OFF OFF
ON
: : : : : : : :
62
ON ON
OFF OFF OFF
ON
OFF
63
∗
ON ON
OFF OFF OFF
ON ON
∗
: Station number 63 can be set for 2 stations occupied type.
•
Swtting of communication speed (Switch No.8 to 10)
Make sure to set the transmission speed in the range as follows.
All setting are turned OFF at shipment, set to 156 kbps.
Transmission speed
No.8
No.9
No.10
156 kbps
OFF
OFF
OFF
625 kbps
OFF
OFF
ON
2.5 Mbps
OFF
ON
OFF
5 Mbps
OFF
ON ON
10 Mbps
ON
OFF OFF
NOTE
1. Open the cover, and set DIP switch with a flat blade driver, etc.
2. Make sure that switch setting is performed with power supply turned off.
3. Be sure to perform this setting of the switch before use.