-24-
No.EX
※※
-OMX1001
■
Setting using Network Configurator
Method to connect the SI unit to the OMRON EtherNet/IP
TM
module (master) is shown below.
Refer to the Operation Manual of the Network Configurator for the detailed operation.
: The drawing below shows the OMRONS software, Network Configurator.
It is necessary to install the EDS file for the Network Configurator. Refer to the manual for the Network
Configurator for installation instructions.
•Drag and drop the SI unit and master from the hardware list into the network window. Enter the IP address
for each product.