SMC Networks D-M9K/D-7K/D-RK Series, Manual

Page: 3 / 12

Trimmer Auto Switch
D-M9K/D- 7K/D-R K
Specifications
Sensor Unit
Auto switch model
D-M9K D-Y7K D-F7K
Mounting Direct mounting (Round groove) Direct mounting (Square groove) Rail mounting
Applicable amplifier unit
D-RNK, D-RPK
Indicator lamp Red lights ON at sensitive position. Green lights ON at optimum detecting position.
Electrical entry
Grommet
Impact resistance
980 m/s
2
Insulation resistance 50 M Ω or more (500 VDC measured via megohmmeter) between lead wire and case
Withstand voltage
1000 VAC for 1 minute (between lead wire and case)
Ambient temperature 14 to 140°F (−10 to 60°C)
Enclosure
IP67
Weight (with connector)
55 g 58 g
Standard
CE Marking
Oilproof Heavy-duty Cable
Auto switch model
D-M9K D-Y7K D-F7K
Sheath Outside diameter [mm]
ø3.5
Insulator
Number of cores
4 cores (Brown/Blue/Black/White)
Outside diameter [mm]
ø1.0
Conductor
Effective area [mm 2 ]
0.15 (AWG26)
Strand diameter [mm]
ø0.08
Min. bending radius [mm] (Reference value)
21
Note) The connector for sensor (e-con connector) is not attached to the lead wire.
It will be supplied loose in the same shipment (1 pc.).
Amplifier Unit (with Sensor Unit)
PLC: Programmable Logic Controller
Model
D-RNK D-RPK
Applicable sensor unit
D-M9K, D-Y7K, D-F7K
Application
For relay and PLC
Power supply voltage
12 to 24 VDC
Current consumption
40 mA or less
Output specification NPN open collector 2 outputs PNP open collector 2 outputs
Load voltage
28 VDC or less
—
Load current
80 mA or less/1 output
Internal voltage drop
1.5 V or less
Leakage current
100
µ
A or less/1 output
Response time
1 ms or less
Indicator lamp
READY: Red lights ON when the piston
position detected (with sensor unit).
OUT1: Green lights ON when turned ON.
OUT2: Orange lights ON when turned ON.
Electrical
entry
Connection to sensor
e-con connector
Power supply/output cable
Grommet
Impact resistance
98 m/s
2
Insulation resistance 50 M
Ω
or more (500 VDC measured via megohmmeter) between lead wire and case
Withstand voltage
1000 VAC for 1 minute (between lead wire and case)
Ambient temperature
14 to 140°F (−10 to 60°C)
Enclosure
IP40
Weight
70 g
Standard
CE Marking
Oilproof Heavy-duty Cable
Model
D-RNK D-RPK
Sheath Outside diameter [mm]
ø3.5
Insulator
Number of cores
4 cores (Brown/Blue/Black/White)
Outside diameter [mm]
ø1.0
Conductor
Effective area [mm
2
]
0.15 (AWG26)
Strand diameter [mm]
ø0.08
Min. bending radius [mm] (Reference value)
21
Internal Circuit
Sensor Unit Amplifier Unit
D-M9K/D - 7K
SOUT1
Black
SOUT2
White
GND
Blue
Vsw
Brown
Main circuit of switch
Detective sensor
DC (−)
Blue
Black
White
Brown
1: SOUT1
2: GND
3: SOUT2
4: Vsw
+
−
DC (−)
OUT2
OUT1
DC (+)
Blue
White
Black
Brown
Blue
Black
White
Brown
+
−
12 to 24 VDC
12 to 24 VDC
OUT2
OUT1
DC (+)
OUT2
Main circuit
of switch
READY OUT1
OUT2
1: SOUT1
2: GND
3: SOUT2
4: Vsw
Main circuit
of switch
READY OUT1
Blue
White
Black
Brown
Sensor Load
Load
Sensor
Load
Load
D-RPK
D-RNK
Connector for sensor
(e-con connector)
Direct mounting
(Round groove)
Direct mounting
(Square groove)
Rail mounting
2