Installation
Warning
○
Air combination
(1)
Do not drop or apply impact during transportation or installation. It will cause damage to the
product and result in operation failure.
(2)
Do not install in areas of high humidity or high temperature. Operation outside of the product
specification range may cause damage to the product or operation failure, or shorten the
product life.
(3)
Connect the product ensuring the direction of "1"(IN) and "2"(OUT) for air direction and
indicated arrow. Incorrect connections may cause malfunction.
(4)
Install with adequate space for maintenance beneath the product. Refer to the dimensional
drawings for necessary space.
(5)
Tighten the two set screws on the spacer with bracket and spacer evenly. Tighten them to the
recommended tightening torque. Insufficient tightening torque may cause loosening or
sealing failure, and excessive tightening torque may cause breakage of screws.
Recommended tightening torque
Unit: N m
Applicable models
AC20*-D
AC30*-D
AC40*-D
AC40*-06-D
AC50*-D
AC60*-D
Part No. of spacer
with bracket
Y200T-D
Y300T-D
Y400T-D
Y500T-D
Y600T-D
Part No. of spacer
Y200-D
Y300-D
Y400-D
Y500-D
Y600-D
Torque
0.36+/-0.036
1.2+/-0.05
1.2+/-0.05
1.4+/-0.05
2.0+/-0.1
○
Air filter, filter regulator and mist separator
(1)
Install vertically so that outlet of drain is downward. It cannot be used in horizontal or upward
direction as it may cause operation failure.
○
Lubricator
(1)
Install the lubricator vertically so that the bowl is downward. It cannot be used in horizontal or
upward direction.
Caution
○
Air combination
(1)
When the air combination is fixed on the wall with hexagon socket head cap screws, ballpoint
driver is recommended as a tool.
○
Air filter, filter regulator and mist separator
(1)
Install the bowl so that the lock button lines up to the groove of the front (or the back) of the
body to avoid drop or damage of the bowl.
-6-
Groove on
body
Lock button
