![background image](http://html1.mh-extra.com/html/smc-networks/8648t-fiche/8648t-fiche_installation-manual_1300243036.webp)
N
ETWORK
P
LANNING
2-6
Application Notes
1. Full-duplex operation only applies to point-to-point access (such as
when a switch is attached to a workstation, server or another switch).
When the switch is connected to a hub, both devices must operate in
half-duplex mode.
2. Avoid using flow control on a port connected to a hub unless it is
actually required to solve a problem. Otherwise back pressure jamming
signals may degrade overall performance for the segment attached to
the hub.
3. As a general rule the length of fiber optic cable for a single switched
link should not exceed 550 m (1805 ft) for multimode fiber or 5 km
(16404 ft) for single-mode fiber. For longer connections, you can use a
1000BASE-ZX SFP transceiver, which supports runs of up to
100 kilometers.
However, power budget constraints must also be considered when
calculating the maximum cable length for your specific environment.
Summary of Contents for 8648T FICHE
