![background image](http://html1.mh-extra.com/html/smc-networks/8648t-fiche/8648t-fiche_installation-manual_1300243045.webp)
C
ONNECTING
TO
THE
C
ONSOLE
P
ORT
3-9
Connecting to the Console Port
The DB-9 serial port on the switch’s front panel is used to connect to the
switch for out-of-band console configuration. The on-board configuration
program can be accessed from a terminal or a PC running a terminal
emulation program. The pin assignments used to connect to the serial port
are provided in the following tables.
Figure 3-7. Serial Port (DB-9 DTE) Pin-Out
The serial port’s configuration requirements are as follows:
◆
Default Baud rate—9,600 bps
◆
Character Size—8 Characters
◆
Parity—None
◆
Stop bit—One
◆
Data bits—8
◆
Flow control—none
Table 3-1. Wiring Map for Serial Cable
Switch’s 9-Pin
Serial Port
Null Modem
PC’s 9-Pin
DTE Port
2 RXD (receive data)
<----------------------------
3 TXD (transmit data)
3 TXD (transmit data)
----------------------------->
2 RXD (receive data)
5 SGND (signal ground) ------------------------------
5 SGND (signal ground)
No other pins are used.
1
5
6
9
Summary of Contents for 8648T FICHE
