![background image](http://html1.mh-extra.com/html/smc-networks/8612t2-fiche/8612t2-fiche_installation-manual_1300241037.webp)
M
OUNTING
3-3
Mounting
A TigerSwitch 10/100/1000 unit can be mounted in a standard 19-inch
equipment rack or on a desktop or shelf. Mounting instructions for each
type of site follow.
Rack Mounting
Before rack mounting the switch, pay particular attention to the following
factors:
◆
Temperature:
Since the temperature within a rack assembly may be
higher than the ambient room temperature, check that the
rack-environment temperature is within the specified operating
temperature range. (See page C-2.)
◆
Mechanical Loading:
Do not place any equipment on top of a
rack-mounted unit
◆
Circuit Overloading:
Be sure that the supply circuit to the rack
assembly is not overloaded.
◆
Grounding:
Rack-mounted equipment should be properly grounded.
Particular attention should be given to supply connections other than
direct connections to the mains.
Summary of Contents for 8612T2 FICHE
