SMC Networks 8612T2 FICHE, Installation Manual

Page: 22 / 74

A
BOUT THE
T
IGER
S
WITCH
10/100/1000
1-4
Ports Status LEDs
The LEDs, which are located on the front panel for easy viewing, are
shown below and described in the following table.
Figure 1-2. Port and System LEDs
Port and Status LEDs
LED Condition Status
Gigabit Ethernet Ports (Ports 1~12)
Link/Act On/Flashing Amber Port has established a valid 10/100
Mbps network connection. Flashing
indicates activity.
On/Flashing Green Port has established a valid 1000
Mbps network connection. Flashing
indicates activity.
Off There is no valid link on the port.
SFP Transceivers Slots
(Ports 9~12) On Green Port has established a valid
1000 Mbps network connection.
Off An SFP transceiver port has no valid
link or there is no transceiver installed
in the slot. The associated RJ-45 port
is enabled.
FDX
(all ports) On Green Port is operating in full-duplex mode.
Off Port is operating in half-duplex
mode.