![background image](http://html1.mh-extra.com/html/smc-networks/8612t2-fiche/8612t2-fiche_installation-manual_1300241023.webp)
D
ESCRIPTION
OF
H
ARDWARE
1-5
Optional Redundant Power Supply
The switch supports an optional Redundant Power Supply (RPS), that can
supply power to the switch in the event of failure of the internal power
supply.
Power Supply Socket
The power socket is located on the rear panel of the switch. The standard
power socket is for the AC power cord. The socket labeled “RPS” is for
the optional Redundant Power Supply (RPS).
Figure 1-3. Power Supply Socket
System Status LEDs
LED
Condition
Status
Power
On Green
The unit’s internal power supply is operating
normally.
On Red
The unit's internal power supply has failed.
Off
The unit has no power connected.
RPU
On Green
The redundant power supply is operating
normally.
On Red
The redundant power supply has failed.
Off
No redundant power supply is connected.
Diag
On Green
The system diagnostic test has completed
successfully.
Flashing Green
The system diagnostic test is in progress.
On Amber
The system diagnostic test has detected a fault.
Summary of Contents for 8612T2 FICHE
